Nano and pico soldering iron WTPP MS 40 W, 12 V, MIL-SPEC, 3 s heat-up - Weller T0052924099
-
This Item:
€198.94
-
WXDV 120 desoldering iron for vertical work, 120 W, 100-450°C - Weller WXDV 120
€336.89
-
WP 80 Robust soldering iron set with safety rest, 80 W, Silver-Line - Weller WP 80 Robust Set
€268.91
Pads on 01005 parts forgive neither too much heat nor a tip head that is too thick. The WTPP MS works there with RTP tips, reaches working temperature in 3 s and controls between 100 and 450 °C. At 40 W and 12 V there is still heat in reserve despite the fine geometry.
Key benefits
- A 3 s heat-up time, the shortest in this range, with a control range of 100 to 450 °C.
- RTP tips for ultra-small SMD from 0402 down to 01005 and for fine pads.
- 40 W at 12 V keep heat in reserve even with a slim tip geometry.
- Sensor and heating element inside the cartridge shorten recovery after every joint.
- Tips change while hot and without tools, and a standby function covers work breaks.
- Potential-free MS version to IPC and MIL-SPEC requirements, ESD safe.
Technical data
| Model | WTPP |
|---|---|
| Length with packaging | 272 mm |
| Width with packaging | 62 mm |
| Height with packaging | 42 mm |
| Scope of delivery | WTPP MS nano handpiece, 40 W, 12 V |
| Sales unit | 1 piece |
| Content unit | 1 piece |
| Battery included | no |
| Power | 40 W |
| Voltage | 12 V |
| Heat-up time | 3 s |
| Temperature range °C | 100 to 450 °C |
| Temperature range °F | 150 to 950 °F |
| ESD safe | yes |
Applications
Soldering ultra-small SMD packages from 0402 down to 01005, work on tiny pads and traces and rework under the microscope. Typical fields are electronics, aerospace, medical technology, sensors, defence and automotive electronics.
Compatibility and scope of delivery
The WTPP MS runs on Weller soldering stations of the WT 2M series and uses tips of the RTP MS family. Sensor and heating element sit inside the cartridge, so tips change while hot and without tools.
Standards and manufacturer
According to the manufacturer, the potential-free MS version is designed to IPC and MIL-SPEC requirements, and the specification table lists the tool as ESD safe. The manufacturer is WELLER Tools GmbH, Carl-Benz-Strasse 2, DE-74354 Besigheim, Germany.
| ESD version | ESD (antistatic) |
|---|---|
| Manufacturer Nr. | T0052924099 |
| Manufacturer | Weller |
| Weight | 0.100000 |
| Sales unit | 1 Stück |
| GPSR manufacturer information | WELLER Tools GmbH, Carl-Benz-Strasse 2, DE-74354 Besigheim, www.weller-tools.com |
| Article authenticity | Original product |
| Condition of article | New |
