WT 1011M single channel nano and pico soldering set with WTPP MS - Weller T0053449699

0201 parts and fine wire links need a slim tip and control that does not overshoot. The WT 1011M set puts the WTPP MS nano and pico soldering pencil on the 95 W WT1M supply unit. Its active RTP tips are at working temperature after 3 seconds.

Benefits in use

• RTP tip family with a 3 second heat up time, the shortest in the WT programme, so there is no waiting at the board.
• Control range 50 to 450 °C at ±2 °C stability and ±9 °C accuracy, fine enough for temperature sensitive components.
• Compact supply unit measuring 150 x 130 x 101 mm, it takes almost no room under a microscope or beside a magnifier lamp.
• WSR 205 safety rest with stop and go, the iron drops its temperature while parked so the fine tip oxidises more slowly.
• Stackable, ESD safe and ready for ZeroSmog fume extraction, with more than ten WT range tools fitting the same unit.

Technical data

Applications

Nano and pico soldering on densely populated boards, rework under the microscope, prototype build, laboratory work and failure analysis. Wherever package sizes below the standard range are handled.

Compatibility and scope of delivery

The set contains the WT1M supply unit for 230 V, the WTPP MS soldering pencil with 40 W at 12 V, the RTP 004 S MS nano and pico tip and the WSR 205 safety rest with stop and go. Further RTP tips and further WT range tools can be added.

Standards and compliance

ESD safe according to the manufacturer and intended for EPA workstations to IEC 61340-5-1. Manufacturer details under GPSR, WELLER Tools GmbH, Carl-Benz-Strasse 2, DE-74354 Besigheim, www.weller-tools.com.