Solder fume extraction kit FAE1 for two workstations, 230 m³/h, HEPA H13, 230 V - JBC FAE1-2K2D

Two benches side by side do not need two extraction units. The FAE1 kit delivers 230 m³/h in total and splits it across two fully flexible arms at 80 m³/h each. Because extraction is tied to lifting the tool, the brushless blower only runs while work is in progress.

Key benefits

• Two FAE072 arms with bench clamp and two FAE010 hoses, so two working areas are equipped straight away.
• FAE1100 filter cassette with M5 pre-filter to EN 779, HEPA H13 to EN 1822 and activated carbon, certified separation of 99.95 percent.
• Demand driven operation cuts power draw, the blower stands still while both tools rest in their stands.
• 6 kPa vacuum and four RJ12 ports for coupling to JBC stations.
• 55 dBA at one metre, suitable for open production areas.
• Dissipative design to ANSI/ESD S20.20 for operation inside an EPA.

Technical data

Applications

Twin benches in electronics manufacturing, repair cells combining a soldering and a rework station, laboratories, test areas and training workshops.

Compatibility and scope of delivery

The set contains the FAE1 unit with FAE1100 cassette, two FAE010 hoses, two FAE072 arms with clamp and the P405 foot switch. The FAE022 arm can be used instead of FAE072. Nozzles FAE090, FAE091, FAE092 and FAE093 serve as capture elements. RJ12 connects JBC stations of the CD, CS, CP, CA, DI, DDE, DME, HDE, JNA, JTSE and NAE ranges.

Standards and compliance

Dissipative properties to ANSI/ESD S20.20, pre-filter to EN 779, HEPA stage H13 to EN 1822. The manufacturer is JBC Soldering SL in Molins de Rei, Spain.