Soldering and desoldering station DDCT 200 W with T245 handle and solder pot - JBC DDCT-2B

Tinning stranded wire and removing multi pin headers are the two jobs where an ordinary iron gives up. The DDCT station handles both with a plug in solder pot of 18 x 15 mm in the T245 handle, backed by 150 W of peak power. The DDE control unit drives two tools at once, so a second channel stays free for an iron or a desoldering tool.

Key benefits

• 200 W rated power and 150 W peak power per tool, so temperature recovers quickly after the tip is submerged.
• Temperature stability of ± 1.5 °C in still air and accuracy of ± 3 percent, both meeting IPC J-STD-001F.
• Working range from 90 to 450 °C, adjustable by a further ± 50 °C in the menu.
• Two channels for soldering or desoldering tools, each channel parameterised separately.
• USB-A for firmware, profiles and a Dino-Lite microscope, USB-B for the PC link, RJ12 for extraction, peripherals and robots.
• C245SP01 solder pot cartridge measuring 18 x 15 mm and the CTS stand with drip tray are included.

Applications

Cable assembly and wire tinning, repair of connectors and terminal blocks, removal of multi pin through hole parts, small series and prototype work as well as training workshops.

Compatibility and scope of delivery

The cartridge type decides compatibility: the T245 handle takes C245 series cartridges, among them the supplied C245SP01 solder pot cartridge measuring 18 x 15 x 10 mm. Delivery covers the DDE control unit for two tools, the CTS solder pot stand with drip tray and guard, the CHB converter for direct handle connection, the T245 handle and the C245SP01 cartridge. A further soldering or desoldering handle can run on the second channel.

Standards and compliance

Voltage and resistance between tip and ground meet ANSI/ESD S20.20 and IPC J-STD-001F, the station complies with CE standards. Operating environment 10 to 40 °C. The manufacturer is JBC Soldering SL in Molins de Rei, Spain.