7-piece ESD safe screwdriver set Phillips and slotted, Pro Series - Weller XPE700

When one blade width is missing during service work, someone improvises and the screw head pays for it. The XPE700 covers Phillips no. 1 and no. 2 plus slotted 1/8, 5/32, 3/16, 1/4 and 5/16 inch with seven ESD safe drivers and closes that gap for the whole workstation.

What the set delivers

• Seven sizes in one set, two Phillips and five slotted, cover the bulk of the fasteners used in equipment building.
• All handle cores are listed as ESD safe in the property table, so the set stays usable on electrostatic sensitive assemblies.
• Ergonomic handles with a soft surface transfer high torque without tiring the palm during long fastening runs.
• Thumb rest on every handle for additional axial force, which keeps the blade seated in the slot.
• Chrome molybdenum steel blades with a satin non-glare finish, and the handle shape stops the driver rolling off the bench.

Technical data

Applications

Electronics manufacturing, test benches and repair at ESD protected workstations, equipment assembly, control cabinet and terminal work as well as field service.

Scope of delivery

Two Phillips screwdrivers no. 1 and no. 2 with the part numbers XPE101 and XPE102, plus five slotted screwdrivers 1/8 x 4 inch, 5/32 x 4 inch, 3/16 x 6 inch, 1/4 x 6 inch and 5/16 x 6 inch, four of them with the part numbers XPE184, XPE5324, XPE3166 and XPE144.

Standards and compliance

The manufacturer lists the set as ESD safe in its property table. Whether a workstation meets IEC 61340-5-1 is decided by verification of the complete EPA, not by a single tool.