A4 target plate 210 x 297 mm two-sided for non-reflective surfaces - Leica GZM26

Dark insulation, black sheet metal or freshly struck concrete return too little light, so the Leica DISTO aborts the measurement or scatters. The GZM26 target plate at 210 x 297 mm is held against the target point and provides a defined reflective surface, with two sides tuned to short and long distances.

Benefits

• Two sides for two measuring ranges, the grey side for short distances, the brown side for long distances.
• A4 format at 210 x 297 mm, large enough to be found reliably in the Digital Pointfinder even over long ranges.
• A defined target area instead of random reflection, which cuts failed readings on dark, glossy or rough surfaces.
• Flat and light at 0.100 kg, the plate stows in a folder or in the lid of the instrument case.
• Purely passive accessory, no battery, no electronics, nothing to wear out.

Applications

Measurements onto dark insulation, black sheet metal, asphalt and fair-faced concrete, surveys across large room depths and outdoors, check measurements on points with no reflective surface of their own, target points a helper can hold on request.

Compatibility and scope of delivery

Designed for Leica DISTO laser distance meters. For smaller target points and corners there is the Leica GZM27 target plate set at 147 x 98 mm. Supplied as one GZM26 target plate.

Standards and origin

Country of origin Switzerland, customs code 9015900000, EAN 7640110690178. Original accessory from Leica Geosystems.