Electronic Super Knips ESD precision cutter with wire clip, 125 mm - Knipex 78 71 125 ESD

Inside an EPA the cut wire should neither spring away nor carry a charge onto the assembly. The 78 71 125 ESD Electronic Super Knips combines electrically dissipative handles with a wire clip. Its ground edges without bevel cut soft wire from 0.2 to 1.6 mm dia. and medium hard wire up to 1.2 mm dia.

Benefits

• Electrically dissipative handles, ESD compliant to DIN EN 61 340-5.
• The wire clip holds the cut wire, so offcuts do not spring away uncontrolled.
• Ground, very sharp edges without bevel, accurately shaped tips also cut wires lying flat from 0.2 mm dia.
• Shear cut with a controlled micro offset of the cutting edges for long service life and an ultra precise cut even on the thinnest wire.
• Extremely smooth action with opening spring and opening limiter for low-fatigue work throughout the shift.
• Special tool steel, black finished, cutting edges additionally induction hardened to approx. 62 HRC.

Areas of use

Board assembly and rework inside EPA zones, precision mechanics, laboratory work and prototyping. It pays off wherever offcuts must not drop into the assembly and electrostatic sensitive devices are close by.

Standards and conformity

The pliers comply with DIN ISO 9654 and DIN EN 61 340-5. According to the manufacturer they contain no substances of very high concern under REACH. The RoHS directive does not apply to this product.