TwistCut corrugated pipe cutter with stripping blades 0.2 to 4 mm², conduit 13 to 32 mm dia., 100 mm, sales packaging - Knipex 90 22 02 SB

Shortening corrugated conduit and then stripping the cores are two steps in the control cabinet that usually call for two tools. The TwistCut 90 22 02 SB cuts plastic corrugated pipe from 13 to 32 mm dia. and strips solid and stranded conductors from 0.2 to 4 mm² with the same tool.

Benefits

• Universal capacity range from 13 to 32 mm dia., one tool for the common conduit sizes.
• No damage to internal cables or pipes, conduit that is already installed can be opened too.
• Stripping blades for cross-sections of 0.2 / 0.3 / 0.8 / 1.5 / 2.5 / 4.0 mm², stripping range stated by the manufacturer as 0.2 to 4 mm².
• Patent pending location ridges on the 1.5 and 2.5 mm² stripping blades for fast insertion of the cable.
• Internal length scale for consistent stripping, legible for both right and left handed users.
• Precise cut without damage thanks to the cutter arrangement with side guide, good accessibility from the slim design at 47 g.

Areas of use

Electrical installation, control cabinet and plant construction, vehicle building, service and maintenance. Wherever conduit is cut to length and the cable inside is terminated straight afterwards.

Standards and conformity

According to the manufacturer the cutter contains substances of very high concern under REACH. The RoHS directive does not apply to this product.