Precision electronics diagonal cutter ESD 125 mm with bolted joint, blister card - Knipex 79 02 125 ESDSB

Anyone working on populated circuit boards needs a diagonal cutter that cuts cleanly and may be used at an ESD workstation. The precision electronics diagonal cutter weighs about 20 % less than conventional electronics pliers and cuts with induction hardened edges of approx. 64 HRC.

Benefits

• Very accurately ground, sharp cutting edges with a very small bevel for exact cuts on sensitive electronic components.
• Cutting edges additionally induction hardened to approx. 64 HRC and therefore durably keen.
• Bolted joint with particularly carefully machined bearing faces for an even, low-friction movement over the whole opening range.
• Smooth double spring opens the tool gently and evenly, which relieves the hand during repetitive work.
• About 20 % less weight than conventional electronics pliers, plus ergonomically optimised multi-component grips and a round head.
• Length 125 mm, the suffix ESD stands for the dissipative version, the suffix SB for the self-service blister card.

Areas of use

Electronics production, repair and test departments, fine mechanics and laboratories. Wherever component leads are cut close to the part and the workstation follows ESD rules. The round head also reaches the cut between closely spaced components.

Tool and technical design correspond to the 79 02 125 diagonal cutter. This order number differs by the dissipative ESD version and the blister packaging.