Twistor T self-adjusting crimping pliers for wire end ferrules 0.14 to 10 mm² in self-service blister - Knipex 97 53 19 SB

Anyone crimping wire end ferrules of different cross-sections one after another loses time adjusting the tool. The Twistor T adjusts itself across the range from 0.14 to 10 mm² and crimps with a trapezoidal profile. This version carries the article number 97 53 19 SB and is packed in a self-service blister, the tool itself is the Twistor T with rotatable crimping head.

Benefits

• Crimping head rotates through 360 degrees with 8 locking positions, so ferrules can be crimped from almost any working position.
• Self-adjusting from 0.14 to 10 mm², no changeover when the cross-section changes.
• Crimp opening accessible from both sides, extra-long ferrules can be fed through.
• Twin wire end ferrules up to 2 x 6 mm² can be crimped.
• Ratchet mechanism for a consistently high crimp quality, unlockable when needed.
• Toggle lever mechanism reinforces the manual force, the tool stays light and handy.

Areas of use

Control cabinet building, control system construction, electrical installation and service work on machines and plants. The rotatable head pays off wherever ferrules are crimped in the installed state and the pliers cannot be guided freely. The blister packaging suits retail display walls and tool issue cabinets.

Note on the technical data

The manufacturer does not run a separate data sheet page for the SB version. Weight, dimensions and EAN of this packaging variant are therefore not available in documented form and are deliberately not stated here. The functional features described apply to the Twistor T tool with rotatable crimping head.