LED surface-mounted luminaire MACH LED PLUS.forty MLAL 42 SD, 540 mm, 16 W, through-wired - Waldmann 113163000-00662735

Anyone running several luminaires in one machine saves wiring effort with the through-wired MACH LED PLUS.forty MLAL 42 SD, because the luminaires can be chained electrically and fed from a single supply line. Over a length of 540 mm it delivers 1680 lm at 16 W, which corresponds to around 105 lm/W luminous efficacy.

What the luminaire delivers in operation

• Through-wired SD version, several luminaires on one supply line instead of individual wiring
• 1680 lm at 16 W, around 105 lm/W luminous efficacy in continuous operation
• Reflector with a 90 degree angle of illumination, wide-beam direct symmetrical with a direct share of around 100 percent
• Degree of protection IP67, watertight and oiltight and therefore resistant to cooling lubricant and splash water
• Vibration resistant from 10 to 55 Hz at 0.35 mm amplitude, shock proof up to 50 g
• LED service life L70 above 60 000 h at a luminaire weight of only 0.8 kg

Applications

• Machine tools and machining centres with several luminaires on one supply line
• Longer working areas covered with 540 mm of luminaire length per unit
• Areas with cooling lubricant, oil and splash water thanks to IP67
• Machines with vibration loads up to 55 Hz
• Equipment built for Canada and the USA, test marks C-ETL-US

Connection and mounting

The luminaire is connected with 20-28 V DC through an A-coded M12 plug-in connector. For the through-wired version Waldmann provides four-pole M12 connection technology for conductors up to 1.5 mm and a protective cap for the open socket of the last luminaire in the chain. No operating device is built in, for operation on mains voltage Waldmann offers 24 V DC constant voltage units. Mounting is done with luminaire brackets from the accessory range, at least two brackets are required per luminaire.

Made in Germany. The luminaire is designed to be repairable.