ESD workstation mat EFB Bubble, round studs, 900 x 1800 mm, without snap

Standing for hours calls for a surface that eases the load on the feet and safely drains static charge at the same time. This workstation mat in foamed polyurethane with a 15 mm round-stud profile does both, with a resistance of 3 x 10E7 to 4 x 10E7 Ohm in the dissipative range. The long 900 x 1800 mm format covers a full bench front and suits workstations where work moves along the bench or two people stand side by side. The version without a snap is intended for setups in which the mat is not connected via a snap fastener.

Benefits

• 15 mm round-stud PUR profile relieves legs and back while standing
• Resistance of 3 x 10E7 to 4 x 10E7 Ohm for use in an EPA to IEC 61340-5-1
• 2 cm bevel all round for a flat transition to the floor
• Silicone and latex free, suitable for ISO class 5 cleanrooms
• Version without snap for setups that do not need a snap connection on the mat

Applications

Long workbenches, assembly lines and test areas in electronics manufacturing where work moves along the bench or several stations sit next to each other. The mat is made for dry areas, and the open-pore surface is cleaned dry only. A yellow edge strip is available as an option, the strip itself is not ESD-capable. The mat is available in other formats.