ESD workstation mat Infinity Smooth, flat studs, 900 x 1200 mm, with DK10 snap

Anyone standing at a workbench for hours needs a surface that relieves the legs and drains static charges safely. This foamed polyurethane mat is 11 mm thick and dissipates with 2 x 10E7 Ohm. At 900 x 1200 mm the mat gives more room to move in front of a wide workbench, so operators stay on the mat when switching between parts tray, soldering position and test instrument. The fitted DK10 snap takes a ground cord directly, so the mat connects to the EPA ground point without extra parts.

Benefits

• Flat-stud profile in 11 mm PUR foam cushions standing work and relieves legs and back
• Closed, glossy pores do not trap dirt, wet cleaning is possible, also in damp areas
• UV and chemical resistant, free from silicone and latex
• 1.5 cm bevel on all sides reduces the tripping risk at the edges
• DK10 snap for direct connection of a ground cord

Applications

Standing workstations in electronics manufacturing, at soldering, test and assembly positions and in cleanrooms up to ISO class 5. The 900 x 1200 mm format leaves room for sideways steps in front of wide workbenches without leaving the mat. A yellow edge strip is available as an option, it is not ESD-capable. The mat is also available in other formats.