SCS Metal-In shielding bag with zip closure, 200 x 305 mm - Desco 300812

This shielding bag in the 200 x 305 mm format protects elongated PCBs and assemblies against electrostatic discharge and electric fields during storage and transport. The aluminium layer sits inside the PET/ALU/PE laminate, so handling does not rub it off. The zip closure makes the bag resealable.

Benefits

• Shielding to standard: tested to EN 61340-5-1 and ANSI/ESD S11.31
• Resealable: open with the zip, check the contents and close again without a heat sealer or tape
• Transparent: part and label remain visible without opening
• Dissipative surface: 1 x 10E4 ohm to below 1 x 10E9 ohm inside and outside
• Clearly marked: printed ESD warning symbol

Applications

The 305 mm height leaves room for elongated PCBs, assemblies with a ribbon cable attached or boards together with their paperwork. Test report and component stay in the same shielded bag from goods receiving to dispatch. Outside the EPA the contents stay protected inside the closed bag. The series is available in further formats.