Dissipative Layer Pad 357 x 246 mm for 48/50-TSC, CSC and MB Containers

When assemblies are stacked inside a container, component leads and solder sides press onto the layer below, and today's scratch is tomorrow's rework. This dissipative layer pad, 357 x 246 mm, fits the Cortronic containers 48/50-TSC, CSC and MB and places a flat, charge-draining divider between two layers.

Benefits

• Format 357 x 246 mm: covers the floor area of those containers, the pad does not ride up the walls.
• Dissipative grade: charges drain away in a controlled way, so the divider stays part of the ESD protected area instead of breaking it.
• One format for three container types: 48/50-TSC, CSC and MB share the same blank, which cuts line items in the consumables store.
• Flat bearing surface: assemblies lie level, the leads of the lower layer do not touch the one above.
• Light: 0,1 kg per pad, even several layers per container change nothing about handling.
• Ordered in tens: matches the running consumption at the packing and picking bench.

Applications

Used across the EPA wherever populated boards or housing parts travel layer by layer in a carton container, for instance between placement, test and dispatch. One pad goes on top of each finished tier while filling, and comes off again on its own when the container is emptied, leaving the tier below untouched.