ESD XLPE foam ELXAC50 conductive, black, 553 x 353 mm, 6 mm thick

As a bottom layer in an ESD container the foam should not sag but form a flat, dissipative support. XLPE foam ELXAC50 is set firm for exactly that and sits in the conductive band of 10E3 to 10E6 ohms. The sheet measures 553 x 353 mm at 6 mm thickness.

Benefits

• Firm grade - the layer stays flat and barely yields under the goods.
• Conductive at 10E3 to 10E6 ohms - charge drains through the support.
• 6 mm thickness - a slim base layer that costs almost no usable height in the container.
• 553 x 353 mm sheet - for ESD containers and cartons in this format.
• 0.1 kg per sheet - a light insert with no noticeable effect on shipping weight.

Application

The usual place for this sheet is the bottom of ESD containers and cartons in which assemblies lie flat. The firm grade also works as a divider between two stacks when the lower tier must not sink in.

The series covers the same sheet in 10 mm and 15 mm thickness as well. It is supplied from 1 piece upwards in increments of 1.