Dispensing Bottle 180 ml ONE TOUCH, Acetone Print, Yellow - A1-ESD EP0708063

At the ESD workstation acetone is used in portions, for example to clean an assembly before test. This bottle holds 180 ml and releases the solvent through its One-Touch top, with no cap to unscrew and put down. The Acetone print stays on the container, so mixing it up with another medium is ruled out.

Benefits

• One-Touch top, a single press releases the small amount required and the bottle stays closed the rest of the time.
• 180 ml contents, a pack size for running use at the bench rather than for storage.
• Acetone print identifies the contents without an extra label and still does so months later.
• Yellow version, several media at the same workstation stay distinguishable at a glance.
• durAstatic design, intended for use inside the ESD protected area.
• Empty weight 0.1 kg, the bottle is handled one-handed and does not tip while dispensing.

Technical data

Application

The bottle is used at cleaning and rework benches inside the EPA, where acetone is metered onto a wipe, a swab or a brush. The closed top keeps consumption and evaporation low because the container is not left open between two operations. On the trolley or the shelf it sits alongside the other bottles of the range, which are separated by colour.

Note on the range

The dispensing bottle belongs to a range that is also stocked in further colour versions. This article is the yellow version carrying the Acetone print.