Conductive SMD cabinet, 6 drawers with inserts and 6 x 42 round boxes Ø 27 x 13 mm - A1-ESD EP0711005

Anyone issuing resistors, capacitors or connector pins one at a time loses time searching and risks mixing parts. The six-drawer SMD cabinet arrives as a finished sorting system, because it ships with inserts and 6 x 42 round boxes in the Ø 27 x 13 mm format, which is 252 individual compartments in one unit.

Benefits

• 252 round boxes across six drawers give a breakdown down to the individual part number without buying additional containers.
• The conductive design drains charge, so cabinet and contents remain part of the ESD protected area instead of interrupting it.
• The supplied inserts hold the boxes in place, a drawer can be opened without upsetting the sorting.
• The Ø 27 x 13 mm box format suits SMD packages, miniature screws and contact parts that cannot be kept apart loose in a drawer.
• Delivered as a complete unit of cabinet, inserts and boxes, so one line item equips a workplace.

Technical data

Application

The cabinet belongs at the repair and rework bench, in prototype build and in the small parts store of an electronics plant. That is where the remaining quantities sit that no tape reel takes back, and those quantities need a fixed, labelled compartment. Because cabinet and boxes are conductive, single components stay accessible inside the EPA without repacking the material first. Use in tool and test equipment issue for contact pins, nozzles and miniature screws is just as common.