Tente ESD transport caster 100 mm, 150 kg load capacity, back hole M12

Transport equipment and chassis that move heavy assemblies through the ESD protected area need casters with load reserve and a conductive link to the structure. This swivel caster carries 150 kg, runs on a wheel of 100 mm diameter and has an overall height of 128 mm. The wheel centre is electrically conductive polyamide, the tread is moulded polyurethane.

Benefits

• Load capacity of 150 kg per caster, enough to equip populated transport racks and heavy material carts.
• Wheel centre of electrically conductive polyamide, so the structure stays tied into the grounding path through the caster instead of acting as an insulator.
• Moulded polyurethane tread with a precision ball bearing, the caster keeps running easily and stays gentle on the shop floor.
• Swivel head with a double ball bearing and a swivel head guard, steering stays easy even when the unit is pushed from the side.
• Bolted wheel axle and thread guard, the wheel can be removed and the bearing stays free of threads and strapping remnants.
• Housing of zinc-plated and blue passivated sheet steel for dry indoor use.
• Back hole fitting with an M12 bolt and an overall height of 128 mm, matching chassis with a central threaded stud.

Application

Typical use is on transport racks, trolleys for magazine racks, order picking carts and chassis inside an EPA, wherever populated goods are moved and the whole structure has to stay electrostatically controlled. The M12 back hole fitting is needed where the frame provides a central threaded stud instead of a top plate. The range is supplied in the wheel diameters 100, 125 and 160 mm, so swivel and fixed casters of one chassis can be matched to a common overall height.