ESD safety boot A 585 XP S3, cowhide leather, metal-free penetration resistant - Atlas 24600

Maintenance staff in an electronics plant move between clean area, workshop and warehouse. Swarf, screws and nails are on the floor there, and the shoe still has to be approved for the ESD workstation. The ankle-high lace-up boot A 585 XP from the Atlas Sneaker Line covers both: safety class S3 with metal-free penetration resistance and charge dissipation to DIN EN 61340-5-1.

Benefits on the shop floor

• Safety class S3 in plain terms. S3 builds on S2 and adds penetration resistance and a profiled outsole. S2 in turn means a water-repellent upper, closed heel area, antistatic behaviour and energy absorption in the heel.
• XP penetration resistance in aramid rather than a steel plate. The high-tech textile is metal-free, much lighter than a steel midsole and follows the natural torsion of the foot instead of blocking it. It also does not trigger metal detectors.
• Steel toe cap with documented test values. Tested to at least 200 joules of impact energy and 15 kN of compression to EN ISO 20345, anatomically shaped.
• Dissipative to DIN EN 61340-5-1. The wearer's charge goes into the floor in a controlled way instead of discharging into an assembly, so one pair of shoes covers the EPA and the workshop.
• Soft full-grain cowhide from the company's own tannery. Atlas processes carefully selected hides only, which noticeably shortens break-in time and reduces pressure points.
• Sneaker sole technology and aktiv-X functional lining. The outsole is cut light and flexible, the lining regulates moisture, does not stain and resists abrasion. Approved for orthopaedic insoles to DGUV rule 112-191.

Technical data

Applications

Maintenance and service in electronics production, machine and plant assembly, workshop, goods-in and warehouse. Suited to anywhere staff move between the EPA and a rough environment and should wear a single pair of shoes.

Standards and conformity

• EN ISO 20345, safety class S3. Toe cap tested to 200 joules and 15 kN to EN ISO 20345.
• DIN EN 61340-5-1, ESD-compliant.
• PPE Regulation (EU) 2016/425, risk category 2.
• DGUV rule 112-191, suitable for orthopaedic insoles.

Sizes

Available in EU sizes 36 to 49 in standard width 10.