ESD safety low shoe GX 155 S1P ladies, mesh upper, width 10, black/white - Atlas 37700

Anyone equipping a department rarely looks for the most expensive model but for the one people put on voluntarily every day. The GX 155 ESD is a closed safety low shoe in class S1P to EN ISO 20345:2012 with a mesh upper, a steel toe cap rated for 200 joules and 15 kN and a metal-free XP penetration barrier. It weighs little, looks like a trainer and still meets the full protection class.

Why this model

• Charge dissipation as the first argument. The shoe is ESD compliant and keeps the resistance measured by the person-shoe-floor method of DIN EN 61340-5-1 below 100 MOhm. Static charge on the wearer drains through the sole in a controlled way instead of building up on the body. Inside an EPA that is what stops a component failing because somebody walked from the bench to the machine.
• S1P in plain words. S1 means a closed heel, antistatic construction and an energy-absorbing heel area. The P adds the penetration-resistant midsole. Anyone walking over assembly debris, cable tie offcuts or nails has that second layer of protection under the foot.
• Steel toe cap with tested figures. The anatomically shaped toe cap withstands at least 200 joules of impact energy and at least 15 kN of compression to EN ISO 20345:2012. That is a 20 kilogram part dropping onto the forefoot from roughly one metre.
• XP penetration resistance without metal. Instead of a steel midsole this model uses a high-tech textile containing aramid fibres. It is light, covers the full area and lets the foot torsion work naturally. For ESD zones and metal detector gates that construction is simply more practical.
• MESH UPPER against heat build-up. The high-tech fabric wraps the foot closely and its air texture keeps the circulation going. In warm production halls the foot climate stays comfortable into the afternoon and the shoe adds almost no bulk.
• SPORTY sole system in sneaker look. The outsole of multifunctional polyurethane is slip-resistant, hard-wearing and abrasion-resistant, while the MPU midsole with the MPU REBOUND SYSTEM supplies dynamics and cushioning, and the outsole is rated SRC. The shoe looks like a trainer and therefore actually gets worn instead of sitting in the locker.

The shoe comes from the ATLAS ladies programme and is built on a women's last rather than as a shrunken men's model. The reinforced toe bumper extends service life in kneeling work, and the aktiv-X functional lining regulates moisture actively and dries quickly after the shift. For orthopaedic insoles the model qualifies to DGUV rule 112-191.

Technical data

Areas of use

Electronics manufacturing and assembly work, test bay and repair, cleanroom ante-area, order picking and stores inside the EPA, maintenance in dry halls. For permanently wet areas or outdoor work an S2 or S3 model with a water-repellent upper suits better, because mesh takes up moisture.

Standards and conformity

• EN ISO 20345:2012, protection class S1P
• Slip resistance SRC, tested on ceramic tile with detergent and on steel with glycerine
• ESD compliant to DIN EN 61340-5-1, person-shoe-floor resistance below 100 MOhm
• PPE Regulation (EU) 2016/425, risk category II
• Orthopaedic insoles to DGUV rule 112-191

Sizes

Available in sizes 35 to 43 in width 10 (standard). The sales unit is one pair. This listing covers the full size range and the size is selected at ordering.