ESD safety low shoe SL 940 BOA blue 2.0 S1 SR, SportLine textile, width 12, black/royal blue - Atlas 61712
-
This Item:
As low as €91.47
-
ESD safety low shoe TURBO LOW S1PS, metal free, HRO outsole, black-red - PUMA Safety 645020210
€109.97Show details
-
ESD safety low shoe Flash 5255 XP BOA S3S SR, BOA Fit System, width 10 - Atlas 70600
As low as €94.95Show details
The SL 940 BOA blue 2.0 in width 12 addresses wearers for whom the standard width is too tight across the forefoot. Equipment and tested values are unchanged: S1 with additional requirement SR under EN ISO 20345:2022, an alu-tec aluminium cap for 200 joules of impact energy and 15 kN of compression, the BOA dial and ESD dissipation below 100 megohms to DIN EN 61340-5-1. SportLine textile upper, EU 36 to 49.
What this model delivers on the floor
- The wearer's static charge drains in a controlled way through lining, sole and floor instead of discharging into a component. For its ESD models ATLAS states a resistance below 100 megohms, measured by the person-shoe-floor method of DIN EN 61340-5-1. The footwear standard EN ISO 20345 only requires antistatic shoes to sit between 100 kilohms and 1000 megohms, and that wide band is not enough for an EPA. In daily use the tighter figure means no assembly lost because someone walked from the test bench to the machine.
- S1 in plain words: closed heel area, antistatic build, 20 joules of energy absorption in the heel and a fuel-resistant outsole. Since the 2022 edition the additional requirement SR stands for the passed slip test on ceramic tile with glycerine.
- The toe cap is aluminium rather than steel. The alu-tec cap passes the same EN ISO 20345 test at 200 joules of impact energy and 15 kN of compression, weighs noticeably less and moves the centre of gravity towards the middle of the foot, which makes trips caused by imbalance rarer. Aluminium behaves thermally neutral and forms no cold bridge inside the shoe.
- The BOA Fit System replaces lacing with a finely adjustable dial, hard-wearing lace cords and low-friction guides. A few turns and the shoe sits evenly across the instep, it can be readjusted with gloves on and it opens completely at the push of a button. Loose laces that catch in a conveyor are gone.
- The SportLine upper is a textile fabric that is particularly air permeable and makes the shoe noticeably lighter than a leather build. On top of that the clima-stream concept balances the moisture inside the shoe and regulates the temperature, so the foot climate stays bearable even in a heated hall. Cushioning for eight hours on your feet. The MPU INNOFLEX outsole guides the force along the INNOFLEX LINE from heel to toe, and the MPU REBOUND SYSTEM takes the energy up in large tread areas and returns it into the next step. Behind it works the aktiv-X functional lining, which moves moisture away, does not stain and stays abrasion resistant.
- This item is built in width 12, that is extra wide. Anyone already pressing at the ball of the foot in standard width 10 gains volume in the forefoot here without ordering a size up and losing heel hold in exchange. That is the most common reason bulk orders come back, and two widths on the shelf settle it. Standard width 10 of the same model runs as article 61700.
Technical data
| Model | SL 940 BOA blue 2.0, W12 ESD |
|---|---|
| Model line | SL 940 BOA blue 2.0 ESD |
| Standard | EN ISO 20345:2022 |
| Safety class | S1 |
| Slip resistance | SR (ceramic tile with glycerine) |
| Shoe type | Safety low shoe |
| Toe cap | yes, alu-tec aluminium, 200 joules and 15 kN |
| Outsole | MPU INNOFLEX system |
| Upper material | SportLine upper material (textile fabric) |
| Shoe width | Width 12 (extra wide) |
| Gender | Unisex |
| Manufacturer colour designation | black / royal blue |
| Colour | blue, black |
| Features |
|
| EU sizes | 36 to 49 |
| ESD compliant | yes, resistance below 100 megohms to DIN EN 61340-5-1 |
| Risk category (PPE Regulation) | Category II |
| Battery included | no |
| Sales unit | 1 pair |
| Content unit | 1 pair |
| Length incl. packaging | 350 mm |
| Width incl. packaging | 250 mm |
| Height incl. packaging | 150 mm |
Areas of use
Electronics production and EPA workstations, test field and final assembly, order picking and indoor transport, shift work with frequent moves between zones. For workplaces with a penetration risk choose a version with an XP insert instead.
Standards and conformity
EN ISO 20345:2022, protection class S1 with the additional requirement SR. The 2022 edition replaced the former markings SRA, SRB and SRC. Slip resistance on tile with detergent has become a basic requirement, and SR denotes the additionally passed test on tile with glycerine. ESD compliant in the sense of DIN EN 61340-5-1, the standard for the electrostatic protected area, with a resistance below 100 megohms by the person-shoe-floor method. Personal protective equipment of risk category II under Regulation (EU) 2016/425, CE marked, the EU declaration of conformity is available from the manufacturer. Approved for orthopaedic insoles under DGUV rule 112-191, where the marking inside the shoe is what counts. The manufacturer is the ATLAS shoe factory in Dortmund.
Sizes
This item covers EU sizes 36 to 49. The width is fixed at Width 12 (extra wide), the size is selected when ordering. One pair is supplied.
| Geschlecht | Unisex |
|---|---|
| Norm | EN ISO 20345:2022, DIN EN 61340-5-1 |
| ESD version | ESD (antistatic) |
| Manufacturer Nr. | 61712 |
| Manufacturer | Atlas |
| Weight | 1.000000 |
| GPSR manufacturer information | ATLAS-Schuhfabrik GmbH & Co.KG, Frische Luft 159, DE-44319 Dortmund, www.atlasschuhe.de |
| Article authenticity | Original product |
| Condition of article | New |
| Farbe | schwarz/royal blau |
| Protection class | S1 |
| Width | 12 |
| Upper material | SportLine-Obermaterial |










