ESD safety low shoe GX 295 S3 ladies, waterproof smooth leather, width 10, black/grey - Atlas 37800

As soon as the route from the ESD workstation leads across the yard or through the wash area, a textile shoe is no longer enough. The GX 295 ESD is a safety low shoe in class S3 to EN ISO 20345:2012 made of roughly 2 mm full-grain waterproof smooth leather, with a steel toe cap rated for 200 joules and 15 kN and a metal-free XP penetration barrier. It covers the whole route from test bench to loading ramp.

Why this model

• Charge dissipation as the first argument. The shoe is ESD compliant and keeps the resistance measured by the person-shoe-floor method of DIN EN 61340-5-1 below 100 MOhm. Static charge on the wearer drains through the sole in a controlled way instead of building up on the body. Inside an EPA that is what stops a component failing because somebody walked from the bench to the machine.
• S3 in plain words. The highest of the classic indoor classes combines everything: closed heel, antistatic build, energy-absorbing heel area, water-repellent upper, penetration-resistant midsole and cleated outsole. One model therefore covers production, stores, maintenance and the walk across the yard.
• Waterproof smooth leather, about 2 mm thick. The full-grain cowhide stays waterproof for hours and keeps the foot dry while remaining breathable and dimensionally stable. Anyone moving between hall, wash bay and yard feels the difference to a textile shoe at the end of the day.
• XP penetration resistance without metal. Instead of a steel midsole this model uses a high-tech textile containing aramid fibres. It is light, covers the full area and lets the foot torsion work naturally. For ESD zones and metal detector gates that construction is simply more practical.
• Steel toe cap with tested figures. The anatomically shaped toe cap withstands at least 200 joules of impact energy and at least 15 kN of compression to EN ISO 20345:2012. That is a 20 kilogram part dropping onto the forefoot from roughly one metre.
• A women's last, not a shrunken men's shoe. The shoe is built on a dedicated women's last matched to a narrower heel, a different instep and softer bedding. That is the difference between a shoe worn for eight hours and one that stays in the locker after the break.

The outsole is the SPORTY sole system of multifunctional polyurethane, slip-resistant, hard-wearing and abrasion-resistant, with an MPU midsole and the MPU REBOUND SYSTEM for cushioning, and the outsole is rated SRC. The aktiv-X functional lining regulates moisture from the inside, which matters exactly in a tightly closed leather shoe. To DGUV rule 112-191 the model is approved for orthopaedic insole fitting.

Technical data

Areas of use

Electronics manufacturing and assembly, maintenance and workshop, stores, goods receiving and loading ramp, walks across the yard in the rain. The S3 package makes this the all-round model for wearers who move between EPA and outdoor areas instead of keeping two pairs of shoes.

Standards and conformity

• EN ISO 20345:2012, protection class S3
• Slip resistance SRC, tested on ceramic tile with detergent and on steel with glycerine
• ESD compliant to DIN EN 61340-5-1, person-shoe-floor resistance below 100 MOhm
• PPE Regulation (EU) 2016/425, risk category II
• Orthopaedic insoles to DGUV rule 112-191

Sizes

Available in sizes 35 to 43 in width 10 (standard). The sales unit is one pair. This listing covers the full size range and the size is selected at ordering.