ESD safety sandal GX 165 for women S1P, mesh upper, blue and pink - Atlas 86800

For colleagues who spend the day between placement, test bench and order picking, the GX 165 is the light version of ESD protection. The shoe dissipates the wearer charge to DIN EN 61340-5-1 at below 100 MOhm and still carries a penetration resistant insert despite the airy mesh upper, which is what makes it S1P. Last and sole follow the women's fit, a dedicated women last rather than a scaled men model.

Why this model

• Protection class S1P to EN ISO 20345. Toe cap rated for 200 joules of impact energy and 15 kN compression, closed heel area with energy absorption, antistatic construction and a penetration resistant insert in the sole.
• ESD to DIN EN 61340-5-1. The person-shoe-floor resistance stays below 100 MOhm, so the wearer remains part of the dissipation chain at the ESD workstation instead of breaking it.
• Mesh upper and clima-stream concept. The high-tech fabric wraps the foot closely and stays permanently air permeable, while clima-stream balances moisture and temperature inside the shoe.
• MPU Light sole technology with the SPORTY LIGHT outsole. The manufacturer developed it specifically for women feet, the MPU REBOUND SYSTEM handles cushioning.
• Replaceable insole with heel cushioning. It can be swapped for an orthopaedic insole to DGUV rule 112-191 without voiding the type examination.
• Slip resistance SRC. The outsole is tested on tile with detergent and additionally on steel with glycerine, the top level of the marking that applied until the 2022 edition of the standard.

Technical data

Areas of use

Electronics manufacturing and placement, test areas, light assembly, order picking and warehouse. The mesh upper is built for air permeability and plays to its strength in heated indoor areas. For wet floors and outdoor work a class S3 model is the better fit.

Standards and conformity

EN ISO 20345 in the S1P SRC configuration, which is how the manufacturer lists this model. S1 stands for a 200 joule toe cap, a closed heel area, energy absorption in the heel region and antistatic construction, the P for the penetration resistant insert. Slip resistance SRC documents the test on tile with detergent plus the test on steel with glycerine. The ESD property is tied to DIN EN 61340-5-1. Atlas states the person-shoe-floor resistance as below 100 MOhm. The antistatic range of the shoe standard itself runs from 100 kOhm to 1,000 MOhm. DGUV rule 112-191 names 0.1 MOhm as the lower limit for limited protection against electric shock when working up to 230 V. Personal protective equipment of risk category 2.

Sizes

This item covers sizes 35 to 43 and is delivered as one pair. The version runs in standard width 10.