Brushless ESD Electric Screwdriver with Count Control 0.3-1.0 Nm, 1/4" - HIOS BLG-5000XBC2-15

The HIOS BLG-5000XBC2-15 is the high-speed version of the BLG-5000BC2 with a 1/4" hex bit holder. It works at 0.3 to 1.0 Nm and up to 1,500 rpm and monitors every fastening with its integrated pulse system and built-in screw counter.

Features

• Torque 0.3-1.0 Nm continuously adjustable, shut-off clutch
• High speed 1,000 / 1,500 rpm for short cycle times
• 1/4" hex bit holder (X version)
• Selectable start type: lever start or push start
• Pulse system detects missing screws, wrong screw types or lengths, countersunk and unseated screws
• Screw counter with target quantity 1-99, counts down only on PASS
• Direct teaching: limits are taught on real screws, tolerance 0/5/10/15/20 %
• Display on the screwdriver with pulse value, PASS/Fail indication and buzzer
• Serial interface (RS-232C) for remote parameter setting and recording of pulse values per fastening
• Brushless motor without carbon dust, ESD design

Application

For series assembly of M2.3 to M3 screws in electronics and device manufacturing, where high speed, 1/4" bits and complete verification of every fastening are required.

Compatibility

Operates with the BLC-70-EU-HK controller, HI speed setting only. Replacement cable: RP50-CL (6-pin, 2 m). VMS-40 and VMS-50 screwdriver stands with the VMS-0900-BLG45 adapter. Torque verification with the HP-10 2025 torque tester. Optional: BLG-BC2-3012 I/O cable, BLG-IF2 converter and BLG-IO-pro1 I/O box. Further variants: BLG-5000XBC2 and BLG-5000XBC2-18.