Straight output G1A102, size 3, 6 to 56 Nm, 3/8 in square - Bosch Rexroth 0608800062

For automated tightening in size 3, the straight output G1A102 brings a 3/8 in square drive to the spindle. Its installed length of 112 mm sets the distance between spindle flange and fastening point.

Benefits

• The 3/8 in square drive accepts standard sockets, so a change of fastener size only needs a new socket.
• Axial compensation with 25 mm spring travel and 16 to 39 N spring force absorbs height tolerances and the screw's travel while it is driven in.
• Typical efficiency of 1: output torque reaches the fastener without deflection losses, the spindle stays on one axis.
• Designed to run maintenance-free for 1 million full-load cycles, which reduces line downtime.
• At 0.33 kg the module adds little to the moving mass of the spindle.

Specifications

Applications

• Joints from 6 to 56 Nm in series assembly
• Multi-spindle tightening systems and tightening stations on assembly lines
• Single-spindle stations on a robot or linear axis

System compatibility

• Rexroth Tightening System 350, fixtured nutrunners of size 3
• Forms the complete spindle together with EC motor, planetary gearbox and transducer
• Driven by an LTS350D or LTE350D power module or the CS351 compact system