ErgoSpin angle nutrunner ESA013G-G, 1 to 13 Nm - Bosch Rexroth 0608841225

The ErgoSpin ESA013G-G angle nutrunner is intended for low-torque joints where the fastening point sits at the side or in a confined space. Its working range of 1 to 13 Nm covers the lower end of the ErgoSpin angle nutrunner line.

The nutrunner is operated on a Rexroth tightening controller, either the CS351 compact tightening system or Tightening System 350. Tightening programs and limits are set there.

Benefits

• Working range 1 to 13 Nm: one tool for all joints within this torque window
• Angle design: output at right angles to the handle, for fastening points that are hard to reach from the front
• Runs on the CS351 compact tightening system or in Tightening System 350, with parameters set in the controller
• Connected via the S-... nutrunner cables for ErgoSpin handheld tools

Specifications

Applications

• Low-torque joints on plastic parts, sheet metal and housings
• Fastening points in tight or laterally positioned spaces
• Manual workstations in small-part and device assembly

System compatibility

• CS351 compact tightening system: controller and power unit in one housing for one nutrunner
• Rexroth Tightening System 350 with power unit and control unit
• S-... nutrunner cables for ErgoSpin handheld tools, length and connector shape to suit the workstation