Straight nutrunner ErgoSpin ESV050-G, 10 to 50 Nm - Bosch Rexroth 0608841246

If the tightening torques at an assembly station lie between 10 and 50 Nm, the ErgoSpin ESV050-G covers that range with a single tool. Bosch Rexroth lists it as a straight nutrunner of the ErgoSpin family. The tightening controller it runs on defines the tightening sequence and shut-off.

Benefits

• Working range of 10 to 50 Nm per manufacturer designation, for medium joints
• Twice the maximum torque of the ESV025-G in the same straight design
• Axial working direction for fastening points reached from above or from the front
• Runs on a Rexroth tightening controller: CS351 compact system or tightening system 350

Specifications

Applications

• Assembly of modules with medium tightening torques
• Manual stations on flow and cycle lines
• Controlled tightening at test and rework stations

System compatibility

• CS351 compact tightening system
• Rexroth tightening system 350
• Handheld tool cables of the S-... series to connect the controller