TASS brake test element TR3, 25 to 50 Nm - Bosch Rexroth 3609438133

A nutrunner working at up to 50 Nm should be checked against a reference regularly, without being removed from the machine. The TASS TR3 25-50 Nm brake test element is applied to the installed tool and checks torque, angle and linearity in one run. As the third size of the TASS elements, TR3 has a 32 mm width across flats and a length l3 of 226.5 mm, and weighs 1.75 kg.

Benefits

• Testing in the installed state, the spindle stays in the machine and the cycle is barely interrupted
• Three parameters in one pass: two torque values, angle and linearity, no second test setup required
• Immediate feedback after the test run, so release or readjustment can be decided on the spot
• Characteristic values M1 25 Nm and M2 50 Nm cover the working range stated in the designation, M3 is specified as 62.5 Nm
• Size TR3 at 1.75 kg with a 32 mm width across flats, easy to handle at the station

Specifications

Applications

• Daily validation of tightening stations in the 25 to 50 Nm range
• Setting nutrunners after maintenance or modification of the spindle
• Checks of handheld and fixtured nutrunners with a target value in this torque band

System compatibility

• TASS (Tool Analysis and Setup System) by Bosch Rexroth, size TR3 with elements from 20 to 100 Nm
• Adapters match the interface to the joint (hex socket, external hex, Torx, internal thread)
• TASS FIX TR3 fixture (Bosch Rexroth 3609438003) for fixed mounting at the test station