TASS brake test element TR3, 30 to 60 Nm - Bosch Rexroth 3609438134

The TASS element TR3 30-60 Nm lets you validate spindles where they work, in the installed state. The working range of 30 to 60 Nm defines the joints for which the element provides the test load, and the result is available right after the run. As the third size of the TASS elements, TR3 has a 32 mm width across flats and a length l3 of 226.5 mm, and weighs 1.75 kg.

Benefits

• Suitable for short intervals, for example daily, so deviations are detected before they carry over into many joints
• Three parameters in one pass: two torque values, angle and linearity, no second test setup required
• Testing in the installed state, the spindle stays in the machine and the cycle is barely interrupted
• Characteristic values M1 30 Nm and M2 60 Nm cover the working range stated in the designation, M3 is specified as 75 Nm
• Size TR3 at 1.75 kg with a 32 mm width across flats, easy to handle at the station

Specifications

Applications

• Regular checks of fixtured nutrunners and spindles with target values from 30 to 60 Nm
• Testing and setting nutrunners before production start or after work on the spindle
• Daily validation of tightening stations without removing the spindle

System compatibility

• TASS (Tool Analysis and Setup System) by Bosch Rexroth, size TR3 with elements from 20 to 100 Nm
• Adapters match the interface to the joint (hex socket, external hex, Torx, internal thread)
• TASS FIX TR3 fixture (Bosch Rexroth 3609438003) for fixed mounting at the test station