TASS brake test element TR2, 15 to 30 Nm - Bosch Rexroth 3609438126

Deviations on fixtured nutrunners are often noticed late. The TASS element TR2 15-30 Nm moves the check to the installed spindle itself and reports immediately after each test run whether torque, angle and linearity are in order. As the second size of the TASS elements, TR2 has a 30 mm width across flats and a length l3 of 176.5 mm, and weighs 1.2 kg.

Benefits

• Three parameters in one pass: two torque values, angle and linearity, no second test setup required
• Immediate feedback after the test run, so release or readjustment can be decided on the spot
• Testing in the installed state, the spindle stays in the machine and the cycle is barely interrupted
• Characteristic values M1 15 Nm and M2 30 Nm cover the working range stated in the designation, M3 is specified as 37.5 Nm
• Size TR2 at 1.2 kg with a 30 mm width across flats, easy to handle at the station

Specifications

Applications

• Regular checks of fixtured nutrunners and spindles with target values from 15 to 30 Nm
• Testing and setting nutrunners before production start or after work on the spindle
• Daily validation of tightening stations without removing the spindle

System compatibility

• TASS (Tool Analysis and Setup System) by Bosch Rexroth, size TR2 with elements from 6 to 35 Nm
• Adapters match the interface to the joint (hex socket, external hex, Torx, internal thread)
• TASS FIX TR2 fixture (Bosch Rexroth 3609438002) for fixed mounting at the test station