TASS brake test element TR3, 35 to 70 Nm - Bosch Rexroth 3609438135

Short test cycles instead of flying blind in production: the TASS TR3 brake test element for 35 to 70 Nm makes daily spindle checks practical, because the spindle stays installed and three parameters are checked in one pass. As the third size of the TASS elements, TR3 has a 32 mm width across flats and a length l3 of 226.5 mm, and weighs 1.75 kg.

Benefits

• Immediate feedback after the test run, so release or readjustment can be decided on the spot
• Suitable for short intervals, for example daily, so deviations are detected before they carry over into many joints
• Three parameters in one pass: two torque values, angle and linearity, no second test setup required
• Characteristic values M1 35 Nm and M2 70 Nm cover the working range stated in the designation, M3 is specified as 87.5 Nm
• Size TR3 at 1.75 kg with a 32 mm width across flats, easy to handle at the station

Specifications

Applications

• Daily validation of tightening stations in the 35 to 70 Nm range
• Setting nutrunners after maintenance or modification of the spindle
• Checks of handheld and fixtured nutrunners with a target value in this torque band

System compatibility

• TASS (Tool Analysis and Setup System) by Bosch Rexroth, size TR3 with elements from 20 to 100 Nm
• Adapters match the interface to the joint (hex socket, external hex, Torx, internal thread)
• TASS FIX TR3 fixture (Bosch Rexroth 3609438003) for fixed mounting at the test station