The 100x100L strut profile is the heaviest standard profile in the Bosch Rexroth profile system, designed for load-bearing frames, machine enclosures, and assembly lines subject to high bending and torsional loads. An area moment of inertia of 318.3 cm⁴ in both axes and a torsional moment of resistance of 31.4 cm³ deliver symmetric stiffness for three-dimensional structures. The anodized aluminum profile is supplied cut to the specified length, with M12 threads in all core holes, D17 bores in slots C/H and D/G, and D17V bores in slots A/F and B/E.
- Eight open slots on a 50 mm grid - compatible with the full Rexroth connector range
- Profile surface area 29.9 cm², mass 8.1 kg/m - rated for high applied loads
- Cut-to-length from L min 60 mm to L max 6000 mm, packaging unit 1 piece
- Anodized aluminum, natural color - corrosion-resistant without additional surface treatment
- Recommended accessories: cover cap 100x100 in black or signal gray
Technical data
| Attribute | Value |
|---|
| Cross-section | 100x100L |
| Profile type | Standard |
| Material | Aluminum, anodized |
| Color | Natural |
| Open slots | 8 |
| Profile slot | 10 |
| Modular dimension | 50 mm |
| Dimensions | 100x100 mm |
| Length min (L min) | 60 mm |
| Length max (L max) | 6000 mm |
| Profile surface (A) | 29.9 cm² |
| Mass (m) | 8.1 kg/m |
| Area moment of inertia X (Ix) | 318.3 cm⁴ |
| Area moment of inertia Y (Iy) | 318.3 cm⁴ |
| Moment of resistance X (Wx) | 63.7 cm³ |
| Moment of resistance Y (Wy) | 63.7 cm³ |
| Torsional moment of inertia (It) | 153.53 cm⁴ |
| Moment of torsion resistance (Wt) | 31.4 cm³ |
| Profile machining | M12 in all core holes; D17 in slots C/H, D/G; D17V in slots A/F, B/E |
| Packaging unit | 1 piece |