Continuous monitor for wrist strap and ESD worksurface 220 VAC - Iteco 9263652

A wrist strap that fails during the shift stays unnoticed if testing only happens at the entrance. The continuous monitor 9263.652 instead supervises the grounding of the operator and of one ESD worksurface without interruption and signals the fault the moment it occurs.

Benefits

• Wave distortion technology prevents false alarms caused by voltage offset, 50 Hz fields and other electromagnetic or electrostatic interference.
• Two paths are supervised at the same time, the operator wrist strap and the path to ground of a worksurface.
• The worksurface requires a path to ground resistance below 10^7 Ω, and the matching ground cord is supplied.
• The wrist strap input accepts both a 10 mm banana plug and the 10 mm snap adaptor.
• At 98.3 x 52.8 x 22.9 mm the unit takes up very little space on the bench.

Technical data

Applications

Permanently monitored single workstations in assembly and repair, test and measurement benches handling high value assemblies and any station where grounding evidence has to be gapless.

Scope of delivery and compatibility

Delivery includes the monitor, the 24 V AC power adapter and the ground cord for the worksurface. Wrist strap and coil cord are not part of the delivery. For personnel testing at the EPA entrance the Wristlab II test stations Iteco 9264.950 and 9264.952 are the matching products.

Standards and origin

The limits required for worksurfaces and personnel grounding follow IEC 61340-5-1. Made in Italy.