Statguard dissipative floor finish, high gloss, 10 l bag-in-box - Desco DESCO 220521

The Desco Statguard dissipative floor finish dissipates static charges and limits triboelectric charge generation when walking, while providing a clear, high-gloss and wear-resistant surface. It converts existing hard floors into ESD floors and removes the need for static-control tile or floor mats.

Benefits

• Limits charge generation when walking to under 100 volts per ANSI/ESD S20.20
• Removes the charge off the body when used with ESD footwear
• Applies to vinyl, VCT, linoleum, rubber, epoxy, acrylic paint and concrete
• UL classified for slip resistance
• Cross-linked polymer for a durable high-gloss finish

Technical data

• Ground resistance RG less than or equal to 1x10E9 ohms (EN 61340-5-1, Table 1)
• RTT 10E7 ohms per ESD S7.1 at 50 percent RH
• Solids content: 18 percent
• Coverage: approx. 49 m² per litre per coat on smooth surfaces
• Drying time: approx. 1 hour
• For use at relative humidity of 30 to 65 percent
• Volume: 10 litre bag-in-box
• RoHS compliant, lead-free
• Country of origin: USA

Applications

Ideal for clean rooms, electronics manufacturing, assembly and test areas. Where a wrist strap system is impractical, the ESD floor and ESD footwear form the primary means of ESD control.

Standards and compliance

Meets EN 61340-5-1 Table 1 and ANSI/ESD S20.20. RoHS compliant.