10 mm Screw-On Stud, Stainless Steel, M4 Internal Thread, with Screws - Desco 230645

Where no earth bonding plug is within reach, this stud creates a fixed connection point right on the bench or equipment. The 10 mm head is machined from stainless steel with an M4 internal thread, and the supplied screws with 4 mm thread length hold it on sheet metal or profiles.

Key benefits

• Machined from stainless steel, corrosion resistant and permanently conductive.
• M4 internal thread for mounting with machine screws.
• Screws with 4 mm thread length included.
• Standard 10 mm head, fits all cords with a 10 mm socket.

Applications

Creating ground points on bench tops, shelving or equipment chassis where coiled cords and ground cords with a 10 mm socket snap on.

Standards

Under IEC 61340-5-1 all items in an EPA are bonded to a common ground point. A stud only becomes a ground point once it is conductively connected to earth, for example through a grounded surface or a ground cord. Measure the ground path after installation and check it periodically.