10 mm Stud with 16 mm Wood Screw for ESD Ground Points, Pack of 10 - Desco 230655

On benches with a wood or chipboard top, this stud sets a fixed ground point in seconds. The 16 mm wood screw is driven straight in, and coiled cords and ground cords with a 10 mm socket snap onto the 10 mm head. The pack of 10 covers several workstations.

Key benefits

• 16 mm wood screw for direct mounting into wood-based boards.
• Standard 10 mm head, fits all cords with a 10 mm socket.
• Fixed ground point on bench, shelf or equipment.
• Small part that can be retrofitted to existing workstations.

Applications

Creating ground points on bench tops, shelving or equipment chassis where coiled cords and ground cords with a 10 mm socket snap on.

Standards

Under IEC 61340-5-1 all items in an EPA are bonded to a common ground point. A stud only becomes a ground point once it is conductively connected to earth, for example through a grounded surface or a ground cord. Measure the ground path after installation and check it periodically.