Menda dissipative ESD badge holder with zipper, horizontal, 102 x 86 mm - Desco 35017

In the EPA, ID badges hang right above the assemblies being handled. An ordinary plastic holder charges up and becomes a static source. The Desco 35017 horizontal ESD badge holder from the Menda line is made from dissipative vinyl rated 1 x 10⁴ to less than 1 x 10¹¹ ohms and generates less than 100 V when rubbed.

Key benefits

• Custom dissipative vinyl, 1 x 10⁴ to less than 1 x 10¹¹ ohms per ANSI/ESD STM11.11
• Low charging: tribocharging below 100 V
• Zipper closure keeps out moisture and dirt and keeps the card inside
• Yellow header with ESD symbol tells everyone at a glance that the holder is ESD-safe
• Inner anti-print liner stops ink transferring from the card to the holder
• 3 x 14 mm slot for a clip, lanyard or badge reel

Applications

For electronics manufacturing, assembly, repair and test, wherever staff in the EPA have to wear a landscape ID badge or access card visibly. For portrait cards, choose the vertical version Desco 35016.

Standards

Resistance is measured per ANSI/ESD STM11.11. The holder meets the requirements of ANSI/ESD S20.20 and ANSI/ESD S541.