Spitzen-SET der gängigstenTypen aus 102er Serie, mit Zusatz-Befestigung und Entlötlitze - Ersa 0102-SET

With only one tip shape on the iron, half the joints on a board get the wrong tool: too fine for a ground plane or too wide for 0.5 mm pitch. This set covers most of the work at a repair bench with three shapes from 0.4 to 2.4 mm.

Features

• 0.4 mm pencil tip for fine pitch, individual pins and rework on small structures.
• 1.0 mm pencil tip as the general purpose shape for leaded components and stranded wire.
• 2.4 mm chisel tip with a large contact face for ground connections and larger pads.
• All three tips in ERSADUR LF form, designed for the higher temperatures of lead-free alloys.
• Additional tip holder 3IT1040-00 in the set, which prepares a second iron or a fast changeover.
• WICK1.5-1.5 desoldering braid at 1.5 mm width for picking up residual solder.

Compatibility

Series 102 tips. The manufacturer lists the i-Tool along with the NANO and PICO versions as the matching tools, which covers the i-CON family stations supplied with those irons.

Applications

Initial equipment for a new bench or restocking tips in service and repair. Useful wherever one iron has to alternate between fine work and larger thermal masses.