i-CON NANO MK2 März-Deal mit extra Ablageständer 0A58 elektronisch geregelte Lötstation 80W mit Standby, antistatisch - Ersa 0IC1205A58

A crowded production or lab bench still needs full soldering power. The Ersa i-CON NANO MK2 delivers 80 W and reaches 350 °C in 9 seconds, yet its footprint is only 145 x 80 mm. This bundle adds the 0A58 stand so tips can be changed while hot.

What the station delivers

• 80 W of heating power with a 9 second heat-up time and a working range of 150 to 450 °C.
• A footprint of just 145 x 80 mm, rated for continuous use in electronics manufacturing.
• Antistatic design to MIL-SPEC and ESA, so it belongs on an ESD protected workstation.
• Automatic standby and sleep modes cut energy use and extend tip life.
• The i-TOOL MK2 iron generation puts out 20 percent more soldering power than the previous series.
• Three fixed temperatures, energy levels and a keylock can be stored using the free PC software and an optional micro SD card.

Technical data

Scope of delivery

• Control station max. 80 W, 230 V, 0IC1235A
• i-TOOL NANO MK2 iron max. 80 W, 16.5 V, 0125CDK
• ERSADUR Tip'n'Turn chisel tip 1.6 mm, 0142CDLF16
• 0A58 stand including one 0008M/SB brass wool dry cleaner

Use and compatibility

The station is designed for continuous electronics production as well as laboratory and development work. The 0A58 stand accepts the i-TOOL TRACE and every i-Tool of the MK2 series. To change a tip, guide it into one of the recesses, turn it by 10 degrees and pull the iron off. The left and right trays take the 0004G viscose cleaning sponge, the centre compartment the 0008M/SB brass wool cleaner.