ESD workbench leg mobile 80x725 mm, height adjustable 700-1050 mm, 2 swivel castors Ø 100 mm with brakes, without push handle, 200 kg - Lista 95.525

With swivel castors at both ends, a workbench can be manoeuvred in every direction even in tight spaces. This ESD workbench leg comes with two 100 mm swivel castors with brakes, adjusts from 700 to 1050 mm and carries 200 kg, it has no push handle.

Benefits

• Lista dissipative paint coating on all painted surfaces, draining charges in a controlled way when the part is connected to the workstation earthing
• Height adjustable from 700 to 1050 mm in 25 mm steps
• Two ESD rubber swivel castors with 100 mm diameter and brakes, load capacity 200 kg

Colours

Choose the ESD colour when you order, from the following options:

• Light grey RAL 7035
• Pale grey NCS S 2403-Y
• Anthracite grey RAL 7016
• Orange NCS S 1080-Y40R

Use and combination

For workbenches in production, test areas, the lab and repair within the EPA that need to be moved or rearranged. A mobile base is made from two workbench legs of this series, a strut and the worktop. As this leg has no push handle, a leg with push handle belongs on the opposite side.

Notes

• Mobile workbenches must be fitted with a push handle in accordance with the German Product Safety Act.
• For stability, a strut must be used on mobile workbenches.
• Universal superstructures up to a maximum height of 500 mm may be mounted directly on the worktop.