table top Sintro beech multiplex, natural, with cable cut-outs, 1230x900 mm - Karl 25.930.85

Cables from soldering stations, power supplies or meters should not run over the table edge. This 1230 x 900 mm SINTRO table top therefore has two Ø 80 mm cut-outs that take leads straight down to the power supply strip or cable tray. The beech multiplex, natural top is 40 mm thick.

Benefits

• Two Ø 80 mm cable feed-throughs with closable plastic covers.
• Multi-layer glued beech board, 40 mm thick, with high bending stiffness.
• Chamfered edges on all sides, no edge banding.
• Clear-lacquered surface with a warm wood look.

Matching accessories and variants

• Same top without cut-outs: KARL 25.920.85
• With cut-outs in direct-coated ESD board: KARL 25.930.87
• With cut-outs in high-pressure laminate (EN 438): KARL 25.930.88
• With cut-outs in conductive ESD high-pressure laminate (EN 438): KARL 25.930.89
• SINTRO table frame standard 1230 x 900 mm: KARL 25.006.70

Applications

• Assembly and packing workstations with a wood surface
• Workshop, pre-assembly and laboratory
• Workstations with several connected devices