Return line for workpiece carriers, track gauge 600 mm, frame width 700 mm - Karl 57.909.70

Bring workpiece carriers back to the start of the line after the last workstation: the KARL return line is mounted as a second level in the transfer frame and runs at an incline, so the carriers roll back on the second level. Designed for track gauge 600 mm and transfer frames 700 mm wide, return line length up to 11 m.

Benefits

• Second level within the existing transfer frame: no extra floor space for returning workpiece carriers.
• Inclined layout, the carriers run back by themselves.
• Cross braces mountable at variable heights to adapt incline and height to the line.
• Takes either a roller track or flanged roller rails.
• Return lines up to 11 m long.
• With a ball outfeed element it can also serve as a removal station in the return line.

Matching accessories and variants

• Transfer base frame 815 mm: KARL 57.025.70
• Transfer base frame 1225 mm: KARL 57.055.70
• Flanged roller rails 815 mm, set of 2: KARL 57.505.72
• ESD flanged roller rails 815 mm, set of 2: KARL 57.505.70
• Continuous roller track 815 mm, track gauge 600 mm: KARL 57.625.72
• ESD continuous roller track 815 mm, track gauge 600 mm: KARL 57.625.70
• Ball outfeed element as removal station in the return line: KARL 57.815.70

Applications

• Transfer lines with circulating workpiece carriers in assembly and testing
• Lines with limited floor space where the return should run in the same frame
• Electronics manufacturing and device assembly with a carrier loop