Air line manifold coupling Line Cupla LineCupla200-T, AL/Steel - Nitto Kohki 320000100

Taking several air hoses off one supply line usually means building a manifold from separate parts. The Nitto Kohki Line Cupla 200 is a ready-made manifold with two or five outlets for 1.5 MPa (15 bar).

• Several outlets from one supply line, model 200T with two outlets, model 200L with five outlets in line and model 200S with five outlets in a star layout
• Working pressure of 1.5 MPa (15 kgf/cm², 15 bar, 218 PSI) on air
• One-way shut-off, every unused outlet stays closed
• Connection by simply pushing the plug in
• Aluminium body with chrome-plated steel coupling parts and an NBR seal (SG) for -20 °C to +60 °C
• Dust caps are supplied, a pressure gauge and a drain cock are available as options

Technical data

Applications

• Distributing compressed air to several tools at one workstation
• Assembly lines with several take-off points from a single supply
• Workshop installations bolted down through the mounting holes
• Connecting pneumatic tools fitted with HI Cupla plugs

Compatibility

The manifold accepts plugs for HI Cupla models 10, 17, 20, 30 and 40 and is interchangeable with the corresponding models of the HI Cupla series. It is not suitable for vacuum in either the connected or the disconnected state.

Standards and compliance

The inlet is a 20PM on the 200T and a 400PM on the 200L and 200S, the outlets are two 200-20SM sockets on the 200T and four 200-20SM sockets together with one 200-40SM socket on the 200L and 200S, and fluid must run from the inlet port to the outlet ports.