Solder wire feeder for 1 mm wire, ESD ground, with holder - Reeco RE-TD1

PACE soldering irons only: the handpiece holder is available for PACE soldering irons only. The unit cannot be used with irons from other manufacturers such as Quick, JBC, Ersa or Weller.

In one-handed soldering the second hand belongs to the component, not to the wire. The TD-1 feeds the set amount of solder, triggered from the switch on the handpiece or from an optional foot switch. The amount stays the same across the shift.

Speed and feed time are set separately so the solder volume matches the joint. The drive is built from metal, the spool sits on a bearing-supported base and pays out without snatching. An LED shows the operating state.

As standard the unit is set up for 1 mm wire, and depending on the version 0.8 mm and 1.5 mm are also available. An ESD grounding connector is fitted, so the unit belongs on an EPA bench.

Benefits

• Automatic solder feed, the same amount at every joint
• Feed speed and feed time adjusted separately
• Triggered from the handpiece switch or a foot switch
• Holder available for PACE soldering irons only
• 1 mm wire as standard, 0.8 mm or 1.5 mm depending on version
• Metal drive and bearing-supported spool base for smooth pay-out
• ESD grounding connector for use inside the EPA

Applications

Repetitive soldering in production and repair, work under a magnifier lamp or microscope, wherever one hand has to stay free for the component.