Mini pole 4 screw-together sections up to 1.30 m for mini prisms - Leica GLS115

Detail points in interior fit-out and on cramped sites are hard to pick up with a full-length prism pole. The Leica GLS115 is built for exactly those jobs, four screw-together sections give target heights of 10, 40, 70, 100 or 130 cm, and the point sits cleanly on the ground mark.

Benefits

• Five target heights from one pole, 10, 40, 70, 100 or 130 cm depending on how many sections are fitted, with no clamp and no reading error.
• Four screw-together sections pack down to a short transport length, so the pole travels in the tool bag.
• Fixed screw joints instead of a clamp sleeve, the target height stays reproducible and cannot slip when the pole is set down.
• Mount for Leica mini prisms GMP111 and GRZ101, which makes the pole usable for total station and DISTO work alike.
• Precision point for a defined contact on a ground point, a mark or a bolt.

Applications

Picking up detail points in interior fit-out, setting out inside buildings and in narrow excavations, check measurements on reference points, work with mini prisms on a total station or a Leica DISTO, anywhere a full-length prism pole is no longer manageable.

Compatibility and scope of delivery

The GLS115 accepts the Leica mini prisms GMP111 and GRZ101. For prisms without a built-in bubble the clip-on Leica GLI115 bubble with holder is recommended in addition. The Leica GVP608 carrying bag is matched to pole and mini prism. The pole is supplied in the BASIC version without prism and without bubble.

Origin

Original accessory from Leica Geosystems, material number 642106.