Multi line laser 3x360° green 35 m with Li-Ion battery and hard case - Leica Lino L6G-1
-
This Item:
€617.70
-
Point laser red 5 points 30 m self-levelling with case and TWIST 360 - Leica Lino P5
€234.30
-
Cross-line laser green 35 m self-levelling with Li-ion battery and hard case - Leica Lino L2G
€382.55
Lay out a full room from a single position, even under bright lighting. The Leica Lino L6G-1 stacks one horizontal and two vertical 360 degree planes at exact right angles and projects them with green high-power diodes up to 35 m.
Benefits
- Green 525 nm laser diodes match the brightness peak of the human eye, so the lines stay readable in bright rooms and over long distances.
- Three full-circle planes create six intersection points up, down, right, left, front and back, which removes repositioning in the room.
- Levelling and intersection point accuracy of 0.2 mm/m each, the lines themselves hold 0.3 mm/m.
- The integrated base keeps the plumb point fixed while the lines are fine-adjusted over 10 degrees around it.
- The 5200 mAh Li-Ion battery pack runs up to 11 hours continuously with three planes, alternatively 3 AA batteries or mains operation via the charger.
- Line intensity selectable in three steps at 100, 75 or 50 percent, housing rated IP54 against dust and splash water.
Technical data
| Beams | 1 x horizontal 360°, 2 x vertical 360° |
|---|---|
| Intersection points | up, down, right, left, front, back (90° / 180°) |
| Range / diameter | 35 m / 70 m |
| Range with RGR 200 receiver | 70 m / 140 m |
| Levelling accuracy | ± 0.2 mm/m |
| Horizontal and vertical line accuracy | ± 0.3 mm/m |
| Intersection point accuracy | ± 0.2 mm/m |
| Self-levelling range | ± 4° |
| Self-levelling time | below 3 s |
| Fine adjustment | ± 10° around the vertical intersection point |
| Out of level warning | lines blink every 5 s |
| Levelling system | pendulum, lockable |
| Laser | 525 nm, class 2 acc. to IEC 60825-1 |
| Laser colour | green |
| Selectable line intensity | 100 %, 75 %, 50 % |
| Protection class | IP54 acc. to IEC 60529, dust and splash water |
| Power supply | Lino Li-Ion battery pack 5200 mAh / 18.7 Wh or 3 x AA alkaline |
| Operating time Li-Ion | up to 11 h (three planes, 50 % line intensity) |
| Operating time alkaline | up to 8 h (three planes, 50 % line intensity) |
| Line width at 5 m | below 2 mm |
| Pulse power for receiver | available |
| Tripod thread | 1/4 in, 5/8 in with adapter |
| Dimensions | 124 x 107 x 154 mm |
| Weight | 0.78 kg |
| Operating temperature | -10 to +50 °C |
| Storage temperature | -25 to +70 °C |
Applications
Drywall and interior fit-out, suspended and aligned ceilings, electrical and sanitary installation, tiling and floor laying, shop fitting and shelving, plus the alignment of machines and partition walls. Three full-circle planes remove the need to reposition the unit several times in a room.
Compatibility and scope of delivery
The 1/4 in tripod thread fits common tripods, 5/8 in with an adapter. Leica offers the RGR 200 receiver, the TRI 70 and TRI 100 tripods, the CLR 290 clamp rod, the TWIST 250 magnetic adapter, the UAL 130 wall mount adapter and the Lino Li-Ion battery pack 5200 mAh as accessories.
- Leica Lino L6G-1
- Li-Ion battery pack including charger and plugs
- Battery tray for alkaline batteries
- TWIST 250 magnetic multi-functional adapter
- UAL 130 wall mount adapter
- Laser target plate
- Drop protection
- Rugged case
- Quick start guide, safety instructions, calibration certificate and warranty card
Standards and origin
Laser class 2 acc. to IEC 60825-1, protection class IP54 acc. to IEC 60529. Country of origin China. EAN 7640110699942, customs code 9015301000, weight 0.78 kg. The delivery contains a lithium-ion battery.
| Weight | 0.780000 |
|---|---|
| Manufacturer | Leica Geosystems |
| Manufacturer Nr. | 912971 |
| EAN | 7640110699942 |
| HS-Code | 9015301000 |
| GPSR manufacturer information | A1-ESD equipment GmbH. Keldersstr. 15, DE-42697 Solingen, www.esd.equipment |
| Condition of article | New |
| Article authenticity | Original product |
| Country of Manufacture | China |
| Norm | DIN EN 60825-1 |
| Certification | IEC 60529 |
| Protection class (IP) | IP54 |
| Range (m) | 35.000000 |
| Operating time (h) | 8.000000 |
| Laser class | 2 |
| Laser colour | green |
