Cross-line laser red 25 m self-levelling with soft bag and TWIST 250 - Leica Lino L2s

Setting out tiles, marking a stud wall or lining up a row of sockets: the Leica Lino L2s supplies two laser lines at right angles and aligns them through its automatic pendulum in under 3 seconds. Deviation stays at ± 0.2 mm/m, which is ± 2.0 mm at a distance of 10 m. The wide fan angle of more than 180° horizontally pulls the line across a full room width in one go.

Benefits on site

• Levelling accuracy ± 0.2 mm/m and line accuracy ± 0.3 mm/m, verified by the blue calibration certificate
• Self-levelling over ± 4°, beyond that range the lines flash every 5 seconds and signal the error
• Working range 25 m, up to 80 m with the RGR 200 laser receiver even in bright surroundings
• IP54 housing protected against dust and splash water, operating from -10 to +50 °C
• TWIST 250 magnetic adapter attaches the unit to profiles, pipes and rails without a tripod
• 3 AA batteries last 8 hours with two beams or 13 hours with a single beam

Technical data

Applications

• Drywall, stud frames and ceiling profiles
• Tiling and floor laying
• Electrical installation, rows of switches and sockets
• Furniture, kitchen and partition fitting in interior work

Scope of delivery

• Leica Lino L2s-1 cross-line laser
• TWIST 250 magnetic multifunctional adapter
• 3 x AA alkaline batteries
• laser target plate
• soft protective bag
• quick start guide, safety instructions, warranty card
• calibration certificate

Compatible accessories

Accessories released by the manufacturer: Lino Li-ion battery pack 5200 mAh (art. 842427), UAL 130 universal adapter (art. 866131), TRI 70 tripod (art. 794963), TRI 100 tripod with tilting head (art. 757938), CLR 290 clamping pole (art. 761762), RGR 200 laser receiver (art. 866090) and red laser viewing glasses GLB 10R (art. 834534). The 1/4 inch tripod thread fits standard photo tripods and 5/8 inch supports via adapter.

Standards, origin and warranty

Laser class 2 to IEC 60825-1 at 635 nm, ingress protection IP54 to IEC 60529. Every unit leaves the factory with a blue calibration certificate. Country of origin China, customs tariff code 9015301000, EAN 7640110697511. Registered within eight weeks of purchase, Leica Geosystems grants a 3 year warranty on the instrument and 2 years on the Li-ion battery.