Green cross line laser 35 m self-levelling with magnetic adapter - Leica Lino L2Gs-1

Set horizontal and vertical reference lines in one pass instead of working with chalk line and spirit level. The Leica Lino L2Gs-1 projects one horizontal and one vertical laser line at an exact right angle, levels itself in under 3 seconds and reaches up to 35 m.

Benefits

• Green 525 nm laser diodes match the brightness peak of the human eye, so the lines are far easier to spot than red lines of comparable output.
• Levelling accuracy of 0.2 mm/m and line accuracy of 0.3 mm/m, enough for drywall, tile grids and furniture installation.
• Self-levelling up to 4 degrees of tilt, outside that range the lines blink every 5 seconds and block a measurement taken out of level.
• Beam angle over 170 degrees vertical and over 180 degrees horizontal, so the line runs across floor, wall and ceiling without a break.
• Housing rated IP54 against dust and splash water, tested to a 0.5 m drop.
• With a laser receiver the unit works up to 80 m, pulse power switches on automatically.

Applications

Interior fit-out and drywall, tiling and floor laying, installation of kitchens, shelving and partition walls, suspended ceilings and the alignment of electrical and sanitary installations. The green lines keep the laser readable in brightly lit rooms and over longer distances.

Compatibility and scope of delivery

The 1/4 in tripod thread fits common photo and construction tripods, 5/8 in with an adapter. The laser runs either on the supplied AA batteries or on the optional Lino Li-Ion battery pack 5200 mAh.

• Leica Lino L2Gs-1
• TWIST 250 magnetic multi-functional adapter
• Laser target plate
• 3 AA batteries
• Soft bag
• Quick start guide, safety instructions, calibration certificate and warranty card

Standards and origin

Laser class 2 acc. to IEC 60825-1, protection class IP54. EAN 7640110699928, customs code 9015301000, weight 0.5 kg.