Self-locking adapter with spring sleeve for standard bits 6.3mm (1/4") included.
T-handle is included in the scope of delivery.

MicroClick torque screwdriver MC 10. For 2 to 10Nm.

Automatic quick-release when tightening screws: Clearly audible and palpable click signal when the selected torque is reached.

Pre-setting of the torque by turning the knurled ring at the end of the handle (lockable). Clearly legible scale with window. Additional micro-scale for fine adjustment: 1 rotation = 2.0Nm. Scale ring with 0.2Nm graduation. With 1/4" square drive (6.3 mm) for holding sockets and self-locking adapter with spring sleeve for holding 1/4" (6.3mm) standard bits in a form fitting manner. Rear end with 1/4" connector for mounting a T-handle (included in the scope of delivery). Accuracy +/- 6 %. Total length 165mm. Weight approx. 270g.

Click here for more information

NO 23 348


The torque wrench MC 10 is a precision tool. It comes in a practical storage box for optimum protection.

1. Self-locking adapter with spring sleeve for standard bits 6.3mm (1/4") included.
2. T-handle is included in the scope of delivery.
   
   

Note:
A well-shaped ergonomic screwdriver handle allows for torques from 6 to 8Nm just by manual operation. For higher torques, the MC 10 has a 1/4" square connector on the rear end for fitting a lever (T-handle, ratchet).

Siehe auch:
MicroClick-Drehmomentschlüssel MC 30, MC 100, MC 200, MC 320
MicroClick-Drehmomentschlüssel MC 200-Multi
MicroClick-Drehmomentschlüssel MC 15
MicroClick-Drehmomentschrauber MC 5
MicroClick-Drehmomentschrauber MC 2